 |
8271592 Rockler Woodworking and Hardware
Classic Wood Center Mount Drawer Slide
This centermount drawer slide will provide years of service.
$5.69 > Learn more @ Shop.Com!
|
|
17977478 Woodcraft
Spokeshave Replacement Blade, Radius
(A) KUNZ Half-Round Spokeshave. Features a concave face blade for easy shaving of round stock. Total length 10", blade width 2-1/16". (B) KUNZ Radius Spokeshave. Sole and blade are ground to a 2" radius for smoothing concave surfaces. Length 10", blade width 2-1/16". These tools are factory ground and require honing before use. Woodcraft's Sharpening Shop can expertly hone your tools prior to shipping. Simply add the appropriate number of sharpenings to your cart before checking out.
$7.99 > Learn more @ Shop.Com!
|
|
17976743 Woodcraft
Post, 3/4" Diameter, 3.5" long
Tired of using a tool rest that's too short, too soft and designed by an engineer that has no idea what it's like to even use a lathe? If you'd like to spend more time turning instead of tuning, the Woodcraft Lathe Tool Rest System is for you. Our straight "L" shaped rest improves tool control by allowing interference-free hand movement over the full length of the rest. The top of the rest features a hardened 1/4" steel rod, which will remain nick free, even after hours of use. The solid steel bowl rests provide a stable curve for turning and a flat top for vibration free scraping. Use the small bowl rest for bowls up to 7" in diameter and the large for up to approximately 14". The "S" bowl rest is 14" long with a 5" D bend on one end and an 8" D bend on the other. Woodcraft tool rests are modular in design, to save you money (buy 2 rests and 1 post), and permit you to use your rests on more than one lathe. Select the proper diameter post for your lathe and a tool rest in a length or shape to meet your needs. Posts screw into rests and can easily be removed and attached to a different accessory.
$10.99 > Learn more @ Shop.Com!
|
|
17976742 Woodcraft
Post, 7/8" Diameter, 3.5" long
Tired of using a tool rest that's too short, too soft and designed by an engineer that has no idea what it's like to even use a lathe? If you'd like to spend more time turning instead of tuning, the Woodcraft Lathe Tool Rest System is for you. Our straight "L" shaped rest improves tool control by allowing interference-free hand movement over the full length of the rest. The top of the rest features a hardened 1/4" steel rod, which will remain nick free, even after hours of use. The solid steel bowl rests provide a stable curve for turning and a flat top for vibration free scraping. Use the small bowl rest for bowls up to 7" in diameter and the large for up to approximately 14". The "S" bowl rest is 14" long with a 5" D bend on one end and an 8" D bend on the other. Woodcraft tool rests are modular in design, to save you money (buy 2 rests and 1 post), and permit you to use your rests on more than one lathe. Select the proper diameter post for your lathe and a tool rest in a length or shape to meet your needs. Posts screw into rests and can easily be removed and attached to a different accessory.
$11.99 > Learn more @ Shop.Com!
|
|
8441243 Woodcraft
Pens From The Wood Lathe
By Dick Sing. Pen kits, in a variety of styles, are widely available, but the techniques to make pens which work well and look spectacular are harder to find. Woodcraft's pen and pencil kits used along with the instructional text and 273 step-by-step color photographs of this book provide the tips and necessary techniques. Twelve different styles of pens are discussed plus advice on selection of materials, set-up, turning, finishing techniques, and tips for final assembly. The ultimate reference. 64 pg., softcover.
$12.95 > Learn more @ Shop.Com!
|
|
18283402 Rockler Woodworking and Hardware
Lathe Duplicator Replacment Cutter
One good turn deserves another! Create precise duplicates of spindles, table legs, and other turned projects. This Lathe Duplicator attaches easily to almost every floor-model lathe. The hand wheel allows for smooth operation while cutting. Will duplicate to a maximum length of 39'' (depending on the lathe used) with a maximum duplication depth-of-cut to 2-3/8''. Suitable for lathe with a turning diameter of 12'' to 20''. Includes high-speed steel cutter.
$12.99 > Learn more @ Shop.Com!
|
|
17976750 Woodcraft
Post, 1" Diameter, 5" long
Tired of using a tool rest that's too short, too soft and designed by an engineer that has no idea what it's like to even use a lathe? If you'd like to spend more time turning instead of tuning, the Woodcraft Lathe Tool Rest System is for you. Our straight "L" shaped rest improves tool control by allowing interference-free hand movement over the full length of the rest. The top of the rest features a hardened 1/4" steel rod, which will remain nick free, even after hours of use. The solid steel bowl rests provide a stable curve for turning and a flat top for vibration free scraping. Use the small bowl rest for bowls up to 7" in diameter and the large for up to approximately 14". The "S" bowl rest is 14" long with a 5" D bend on one end and an 8" D bend on the other. Woodcraft tool rests are modular in design, to save you money (buy 2 rests and 1 post), and permit you to use your rests on more than one lathe. Select the proper diameter post for your lathe and a tool rest in a length or shape to meet your needs. Posts screw into rests and can easily be removed and attached to a different accessory.
$12.99 > Learn more @ Shop.Com!
|
|
30212296 Woodcraft
4" Tool Rest
Model 70-100 . Rikon has taken the standard mini lathe to the next level with increased capacity - this mini lathe does more in less space. *12" Swing With 16" Between Centers *12 Position Indexed Head *6 Speeds: 430, 810, 1,230, 1,810, 2,670, 3,900 *8" Tool Rest *12" Swing With 16" Between Centers * Powered by a 1/2 HP TEFC motor *Multiple Extension Capability
$14.99 > Learn more @ Shop.Com!
|
|
30212295 Woodcraft
6" Face Plate
Model 70-100 . Rikon has taken the standard mini lathe to the next level with increased capacity - this mini lathe does more in less space. *12" Swing With 16" Between Centers *12 Position Indexed Head *6 Speeds: 430, 810, 1,230, 1,810, 2,670, 3,900 *8" Tool Rest *12" Swing With 16" Between Centers * Powered by a 1/2 HP TEFC motor *Multiple Extension Capability
$19.99 > Learn more @ Shop.Com!
|
|
30212299 Woodcraft
6" Tool Rest
Model 70-100 . Rikon has taken the standard mini lathe to the next level with increased capacity - this mini lathe does more in less space. *12" Swing With 16" Between Centers *12 Position Indexed Head *6 Speeds: 430, 810, 1,230, 1,810, 2,670, 3,900 *8" Tool Rest *12" Swing With 16" Between Centers * Powered by a 1/2 HP TEFC motor *Multiple Extension Capability
$19.99 > Learn more @ Shop.Com!
|
|
17979031 Woodcraft
V-35 Foot Control
The V-35 has stepped variable speed (14k, 22k, 27k, 33k), with speed dial clearly marked on the faceplate of the power unit. Forward and reverse are available easily on the same faceplate, as is the power rocker switch (easy to see and operate as it is bright red). The handpiece receptacle is on the left side of the front plate, so all connections and controls are immediately at hand and easy to reach. The handpiece reverse and forward switch defaults to forward and quickly snaps back to forward when released from the reverse position. The coiled cord on the handpiece straightens to more than five feet in length, and is light enough to not interfere with movement when you're carving. You get greater freedom of movement than is possible with flexible shafts. The handpiece is molded and fits the hand exceptionally well. Optional Foot Control allows for full range variable speed from 0 - 33,000 RPM. Accepts 1/8" and 3/32" shank bits.
$59.99 Now: $21.99 > Learn more @ Shop.Com!
|
|
20808536 ShoppersChoice.com
Ammco Negative Rake Brake Lathe Bits - 6 Pack
Carbide for long lasting performance six cutting edges on each bit for use with ammco brake lathes comes with screws
$27.40 Now: $22.26 > Learn more @ Shop.Com!
|
|
17980166 Woodcraft
3/8" Dia., Small Four Spur Center, #2 MT
Having the correct size and style drive center makes your turning easier and safer. When turning small pieces a small drive center tears out less frequently and is much less likely to be struck by your tool. Heavier work demands a large, well-made center for a positive, safe grip to drive the piece. 1" Diameter Two Spur Center #2 MT , for turning natural edge bowls and other rough, uneven blanks. 1-1/8" Diameter Four Spur Center #2 MT , with removable center point. Small Drive Centers for turning spindles and other small work between centers.
$23.99 > Learn more @ Shop.Com!
|
|
17980165 Woodcraft
1/2" Dia., Small Four Spur Center, #2 MT
Having the correct size and style drive center makes your turning easier and safer. When turning small pieces a small drive center tears out less frequently and is much less likely to be struck by your tool. Heavier work demands a large, well-made center for a positive, safe grip to drive the piece. 1" Diameter Two Spur Center #2 MT , for turning natural edge bowls and other rough, uneven blanks. 1-1/8" Diameter Four Spur Center #2 MT , with removable center point. Small Drive Centers for turning spindles and other small work between centers.
$23.99 > Learn more @ Shop.Com!
|
|
8446648 Woodcraft
Lathe Dusthood
Eliminates nearly all of that fine turning dust that flies into your face and collects all over your lathe and stand. The 6" x 9" opening is ideal for spindle and small to intermediate bowl turning. The hinged clear plastic shield adjusts for optimal protection and collection, while allowing an unobstructed view of the workpiece. The "L" bracket allows you to easily clamp the hood onto most lathes at any point along their bed. The 4" fitting allows you to utilize standard collection hose or use an adapter to "step down" to your shop vac's hose.
$24.50 > Learn more @ Shop.Com!
|
|
18140086 Woodcraft
7/8"-14 TPI RH Insert
The newest evolution of the classic Nova Chuck is finally available - the SuperNova 2 ! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances. Its patented gearing system delivers incredible gripping power and is over a third faster than the original SuperNova. With SuperNova 2 gripping power you'll find yourself turning longer, more delicate stems. Large, rough and uneven work that you couldn't handle before can now be turned with greater security. The SuperNova 2 requires only one hand to operate using a ball nosed Allen key with a large easy grip handle (included). It's quick to tighten and requires much less effort. The ball nose allows the handle to operate at an angle while tightening the chuck. The SuperNova 2 has a fully sealed heavy duty backing plate made from Duracon 25 composite which is reinforced with stranded glass fiber. Backing plate design incorporates a 24 division index for future indexing accessories. All of the original Nova Chuck accessories, jaws, and inserts are 100% compatible with the SuperNova 2 ! The unique and user friendly features of this chuck prove it was designed by and for woodturners. Diameter of chuck is 3-7/8", depth is 3-3/8", weight 5-1/2 lb. Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual. Requires a threaded body insert to fit your lathe.
$24.99 > Learn more @ Shop.Com!
|
|
17980168 Woodcraft
1" Dia., Two Spur Center, #2 MT
Having the correct size and style drive center makes your turning easier and safer. When turning small pieces a small drive center tears out less frequently and is much less likely to be struck by your tool. Heavier work demands a large, well-made center for a positive, safe grip to drive the piece. 1" Diameter Two Spur Center #2 MT , for turning natural edge bowls and other rough, uneven blanks. 1-1/8" Diameter Four Spur Center #2 MT , with removable center point. Small Drive Centers for turning spindles and other small work between centers.
$24.99 > Learn more @ Shop.Com!
|
|
24158936 Woodcraft
7/8"-14 TPI RH Insert
Nova Titan 5" Companion is specifically designed for large and heavy turnings. It is a full 5" in diameter, 1" larger than the Super Nova chuck. The jaw mechanism is easily opened and closed with a large T-handled hex key wrench (included). Accepts all the jaw sets from both the Super and Standard Nova Chucks (accessory power grip jaws in photo available separately). Requires a threaded body insert to fit your lathe and a set of jaws. Threaded Body Inserts fit all Nova chucks. Extra Screw Chuck. 19mm (3/4") long, RH. Jaw Fastening Spares Kit - 8 extra screws, 2 allen wrenches.
$24.99 > Learn more @ Shop.Com!
|
|
18140092 Woodcraft
1"-8 TPI RH Insert
The newest evolution of the classic Nova Chuck is finally available - the SuperNova 2 ! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances. Its patented gearing system delivers incredible gripping power and is over a third faster than the original SuperNova. With SuperNova 2 gripping power you'll find yourself turning longer, more delicate stems. Large, rough and uneven work that you couldn't handle before can now be turned with greater security. The SuperNova 2 requires only one hand to operate using a ball nosed Allen key with a large easy grip handle (included). It's quick to tighten and requires much less effort. The ball nose allows the handle to operate at an angle while tightening the chuck. The SuperNova 2 has a fully sealed heavy duty backing plate made from Duracon 25 composite which is reinforced with stranded glass fiber. Backing plate design incorporates a 24 division index for future indexing accessories. All of the original Nova Chuck accessories, jaws, and inserts are 100% compatible with the SuperNova 2 ! The unique and user friendly features of this chuck prove it was designed by and for woodturners. Diameter of chuck is 3-7/8", depth is 3-3/8", weight 5-1/2 lb. Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual. Requires a threaded body insert to fit your lathe.
$24.99 > Learn more @ Shop.Com!
|
|
18140088 Woodcraft
3/4"-16 TPI RH Insert
The newest evolution of the classic Nova Chuck is finally available - the SuperNova 2 ! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances. Its patented gearing system delivers incredible gripping power and is over a third faster than the original SuperNova. With SuperNova 2 gripping power you'll find yourself turning longer, more delicate stems. Large, rough and uneven work that you couldn't handle before can now be turned with greater security. The SuperNova 2 requires only one hand to operate using a ball nosed Allen key with a large easy grip handle (included). It's quick to tighten and requires much less effort. The ball nose allows the handle to operate at an angle while tightening the chuck. The SuperNova 2 has a fully sealed heavy duty backing plate made from Duracon 25 composite which is reinforced with stranded glass fiber. Backing plate design incorporates a 24 division index for future indexing accessories. All of the original Nova Chuck accessories, jaws, and inserts are 100% compatible with the SuperNova 2 ! The unique and user friendly features of this chuck prove it was designed by and for woodturners. Diameter of chuck is 3-7/8", depth is 3-3/8", weight 5-1/2 lb. Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual. Requires a threaded body insert to fit your lathe.
$24.99 > Learn more @ Shop.Com!
|
|
24158942 Woodcraft
1-1/4"-8 TPI RH Insert
Nova Titan 5" Companion is specifically designed for large and heavy turnings. It is a full 5" in diameter, 1" larger than the Super Nova chuck. The jaw mechanism is easily opened and closed with a large T-handled hex key wrench (included). Accepts all the jaw sets from both the Super and Standard Nova Chucks (accessory power grip jaws in photo available separately). Requires a threaded body insert to fit your lathe and a set of jaws. Threaded Body Inserts fit all Nova chucks. Extra Screw Chuck. 19mm (3/4") long, RH. Jaw Fastening Spares Kit - 8 extra screws, 2 allen wrenches.
$24.99 > Learn more @ Shop.Com!
|
|
24158938 Woodcraft
5/8" Plain Insert
Nova Titan 5" Companion is specifically designed for large and heavy turnings. It is a full 5" in diameter, 1" larger than the Super Nova chuck. The jaw mechanism is easily opened and closed with a large T-handled hex key wrench (included). Accepts all the jaw sets from both the Super and Standard Nova Chucks (accessory power grip jaws in photo available separately). Requires a threaded body insert to fit your lathe and a set of jaws. Threaded Body Inserts fit all Nova chucks. Extra Screw Chuck. 19mm (3/4") long, RH. Jaw Fastening Spares Kit - 8 extra screws, 2 allen wrenches.
$24.99 > Learn more @ Shop.Com!
|
|
18140090 Woodcraft
1"-12 TPI RH Insert
The newest evolution of the classic Nova Chuck is finally available - the SuperNova 2 ! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances. Its patented gearing system delivers incredible gripping power and is over a third faster than the original SuperNova. With SuperNova 2 gripping power you'll find yourself turning longer, more delicate stems. Large, rough and uneven work that you couldn't handle before can now be turned with greater security. The SuperNova 2 requires only one hand to operate using a ball nosed Allen key with a large easy grip handle (included). It's quick to tighten and requires much less effort. The ball nose allows the handle to operate at an angle while tightening the chuck. The SuperNova 2 has a fully sealed heavy duty backing plate made from Duracon 25 composite which is reinforced with stranded glass fiber. Backing plate design incorporates a 24 division index for future indexing accessories. All of the original Nova Chuck accessories, jaws, and inserts are 100% compatible with the SuperNova 2 ! The unique and user friendly features of this chuck prove it was designed by and for woodturners. Diameter of chuck is 3-7/8", depth is 3-3/8", weight 5-1/2 lb. Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual. Requires a threaded body insert to fit your lathe.
$24.99 > Learn more @ Shop.Com!
|
|
17980167 Woodcraft
1-1/8" Dia., Four Spur Center, #2 MT
Having the correct size and style drive center makes your turning easier and safer. When turning small pieces a small drive center tears out less frequently and is much less likely to be struck by your tool. Heavier work demands a large, well-made center for a positive, safe grip to drive the piece. 1" Diameter Two Spur Center #2 MT , for turning natural edge bowls and other rough, uneven blanks. 1-1/8" Diameter Four Spur Center #2 MT , with removable center point. Small Drive Centers for turning spindles and other small work between centers.
$24.99 > Learn more @ Shop.Com!
|
|
18140087 Woodcraft
5/8" Plain Insert
The newest evolution of the classic Nova Chuck is finally available - the SuperNova 2 ! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances. Its patented gearing system delivers incredible gripping power and is over a third faster than the original SuperNova. With SuperNova 2 gripping power you'll find yourself turning longer, more delicate stems. Large, rough and uneven work that you couldn't handle before can now be turned with greater security. The SuperNova 2 requires only one hand to operate using a ball nosed Allen key with a large easy grip handle (included). It's quick to tighten and requires much less effort. The ball nose allows the handle to operate at an angle while tightening the chuck. The SuperNova 2 has a fully sealed heavy duty backing plate made from Duracon 25 composite which is reinforced with stranded glass fiber. Backing plate design incorporates a 24 division index for future indexing accessories. All of the original Nova Chuck accessories, jaws, and inserts are 100% compatible with the SuperNova 2 ! The unique and user friendly features of this chuck prove it was designed by and for woodturners. Diameter of chuck is 3-7/8", depth is 3-3/8", weight 5-1/2 lb. Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual. Requires a threaded body insert to fit your lathe.
$24.99 > Learn more @ Shop.Com!
|
